Scaling up of the hybrid direct carbon fuel cell technology

A hybrid direct carbon fuel cell (HDCFC), combining molten carbonate fuel cell (MCFC) and solid oxide fuel cell (SOFC) technologies, is capable of converting solid carbon directly into electrical energy without intermediate reforming. The performance level achieved on small-scale cells (area <4 cm2) suggests that engineering developments should now be undertaken to scale up and demonstrate the feasibility of practical systems. The scaling up of the HDCFC through the design and test of single stack repeat unit with realistic cell sizes was investigated in this study. A single cell of -12.56 cm2 active area produced a maximum power of -1.2 W at 800 °C and a current density of -200 mA cm2 at 0.6 V, using wood-based pyrolyzed medium density fiberboard (p-MDF) as fuel. In comparison, the HDCFC with activated carbon as fuel produced a maximum power density of 36 and 53 mW cm_2 at 700 and 800 °C, respectively, and an electric efficiency of -40% evaluated under 0.7 V for 17 h at 700 °C. These results demonstrated the applicability of HDCFC to practical systems while stack units were operated in batch mode and an appropriate fuel feeding mechanism has to be designed. Moreover, more engineering advances should be done to enhance power output since a HDCFC stack unit involves multiple challenges that have not been addressed yet, including system configuration and corrosion protection, and durability.