Heat transfer optimisation through viscous ternary nanofluid flow over a stretching/shrinking thin needle

Liping Yu; Yijie Li; Venkatesh Puneeth; Sami Znaidia; Nehad Ali Shah; Sarpabhushana Manjunatha; Muhammad Shoaib Anwar; Muhammad Riaz Khan

doi:10.1080/10407782.2023.2267750

Heat transfer optimisation through viscous ternary nanofluid flow over a stretching/shrinking thin needle

Liping Yu, Yijie Li^*, Venkatesh Puneeth, Sami Znaidia, Nehad Ali Shah, Sarpabhushana Manjunatha, Muhammad Shoaib Anwar, Muhammad Riaz Khan

^*Corresponding author for this work

School of Computer Science

Research output: Contribution to journal › Article › peer-review

Abstract

The current investigation interprets the flow and the thermal characteristics of the ternary nanofluid composed of MoS₂, ZnO, and SiO₂ spherical nanoparticles and water. The resulting nanofluid is MoS2−ZnO−SiO2−(H2O+EG) where (H2O+EG) act as the base fluid which help in the flow and the nanoparticles contribute to enhancing the heat conductivity. The flow is assumed to occur across a thin needle whose surface is maintained at a higher temperature than the surroundings. The mathematical model is framed by incorporating radiation introduced by Rosseland in terms of partial differential equations (PDE). This system of equations governs the flow and thermal properties of fluid which are converted to a system of ordinary differential equations (ODE). The major outcomes of the study indicated that the increase in the amount of molybdenum disulfide enhanced the heat conducted by the nanofluid whereas it reduced the flow speed. The positive values of the heat source/sink parameter caused the heat conduction of the nanofluid to go high.

Original language	English
Number of pages	15
Journal	Numerical Heat Transfer, Part A: Applications
Volume	Latest Articles
Early online date	26 Oct 2023
DOIs	https://doi.org/10.1080/10407782.2023.2267750
Publication status	E-pub ahead of print - 26 Oct 2023

Keywords

Heat transfer
Nanoparticles
Radiation
Slip
Ternary nanofluid

Access to Document

10.1080/10407782.2023.2267750Licence: CC BY

Yu_2023_NHTPAA_Heattransfer_CCBY
Copyright © 2023 The Author(s). Published with license by Taylor & Francis Group, LLC. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Final published version, 1.34 MBLicence: CC BY

Cite this

@article{3169f5150ded476b9d6bcb56dc61afb7,

title = "Heat transfer optimisation through viscous ternary nanofluid flow over a stretching/shrinking thin needle",

abstract = "The current investigation interprets the flow and the thermal characteristics of the ternary nanofluid composed of MoS2, ZnO, and SiO2 spherical nanoparticles and water. The resulting nanofluid is MoS2−ZnO−SiO2−(H2O+EG) where (H2O+EG) act as the base fluid which help in the flow and the nanoparticles contribute to enhancing the heat conductivity. The flow is assumed to occur across a thin needle whose surface is maintained at a higher temperature than the surroundings. The mathematical model is framed by incorporating radiation introduced by Rosseland in terms of partial differential equations (PDE). This system of equations governs the flow and thermal properties of fluid which are converted to a system of ordinary differential equations (ODE). The major outcomes of the study indicated that the increase in the amount of molybdenum disulfide enhanced the heat conducted by the nanofluid whereas it reduced the flow speed. The positive values of the heat source/sink parameter caused the heat conduction of the nanofluid to go high.",

keywords = "Heat transfer, Nanoparticles, Radiation, Slip, Ternary nanofluid",

author = "Liping Yu and Yijie Li and Venkatesh Puneeth and Sami Znaidia and Shah, {Nehad Ali} and Sarpabhushana Manjunatha and Anwar, {Muhammad Shoaib} and Khan, {Muhammad Riaz}",

note = "The authors extend their appreciation to the Deanship of Scientific Research at King Khalid University for funding this work through large group Research Project Project under the grant number RGP2/107/44.",

year = "2023",

month = oct,

day = "26",

doi = "10.1080/10407782.2023.2267750",

language = "English",

volume = "Latest Articles",

journal = "Numerical Heat Transfer, Part A: Applications",

issn = "1040-7782",

publisher = "Taylor and Francis",

}

TY - JOUR

T1 - Heat transfer optimisation through viscous ternary nanofluid flow over a stretching/shrinking thin needle

AU - Yu, Liping

AU - Li, Yijie

AU - Puneeth, Venkatesh

AU - Znaidia, Sami

AU - Shah, Nehad Ali

AU - Manjunatha, Sarpabhushana

AU - Anwar, Muhammad Shoaib

AU - Khan, Muhammad Riaz

N1 - The authors extend their appreciation to the Deanship of Scientific Research at King Khalid University for funding this work through large group Research Project Project under the grant number RGP2/107/44.

PY - 2023/10/26

Y1 - 2023/10/26

N2 - The current investigation interprets the flow and the thermal characteristics of the ternary nanofluid composed of MoS2, ZnO, and SiO2 spherical nanoparticles and water. The resulting nanofluid is MoS2−ZnO−SiO2−(H2O+EG) where (H2O+EG) act as the base fluid which help in the flow and the nanoparticles contribute to enhancing the heat conductivity. The flow is assumed to occur across a thin needle whose surface is maintained at a higher temperature than the surroundings. The mathematical model is framed by incorporating radiation introduced by Rosseland in terms of partial differential equations (PDE). This system of equations governs the flow and thermal properties of fluid which are converted to a system of ordinary differential equations (ODE). The major outcomes of the study indicated that the increase in the amount of molybdenum disulfide enhanced the heat conducted by the nanofluid whereas it reduced the flow speed. The positive values of the heat source/sink parameter caused the heat conduction of the nanofluid to go high.

AB - The current investigation interprets the flow and the thermal characteristics of the ternary nanofluid composed of MoS2, ZnO, and SiO2 spherical nanoparticles and water. The resulting nanofluid is MoS2−ZnO−SiO2−(H2O+EG) where (H2O+EG) act as the base fluid which help in the flow and the nanoparticles contribute to enhancing the heat conductivity. The flow is assumed to occur across a thin needle whose surface is maintained at a higher temperature than the surroundings. The mathematical model is framed by incorporating radiation introduced by Rosseland in terms of partial differential equations (PDE). This system of equations governs the flow and thermal properties of fluid which are converted to a system of ordinary differential equations (ODE). The major outcomes of the study indicated that the increase in the amount of molybdenum disulfide enhanced the heat conducted by the nanofluid whereas it reduced the flow speed. The positive values of the heat source/sink parameter caused the heat conduction of the nanofluid to go high.

KW - Heat transfer

KW - Nanoparticles

KW - Radiation

KW - Slip

KW - Ternary nanofluid

U2 - 10.1080/10407782.2023.2267750

DO - 10.1080/10407782.2023.2267750

M3 - Article

SN - 1040-7782

VL - Latest Articles

JO - Numerical Heat Transfer, Part A: Applications

JF - Numerical Heat Transfer, Part A: Applications

ER -

Heat transfer optimisation through viscous ternary nanofluid flow over a stretching/shrinking thin needle

Abstract

Keywords

Access to Document

Fingerprint

Cite this