Deciphering the interaction of single-phase La_0.3Sr_0.7Fe_0.7Cr_0.3O_3-δwith CO₂/CO environments for application in reversible solid oxide cells

A detailed study aimed at understanding and confirming the reported highly promising performance of a La0.3Sr0.7Fe0.7Cr0.3O3-δ (LSFCr) perovskite catalyst in CO2/CO mixtures, for use in reversible solid oxide fuel cells (RSOFCs), is reported in this work, with an emphasis on chemical and performance stability. This work includes an X-ray diffraction (XRD), thermogravimetric analysis (TGA), and electrochemical study in a range of pO2 atmospheres (pure CO2, CO alone (balance N2), and a 90-70% CO2/10-30% CO containing mixture), related to the different conditions that could be encountered during CO2 reduction at the cathode. Powdered LSFCr remains structurally stable in 20-100% CO2 (balance N2, pO2 = 10-11-10-12 atm) without any decomposition. However, in 30% CO (balance N2, pO2 ∼10-26 atm), a Ruddlesden-Popper phase, Fe nanoparticles, and potentially some coke are observed to form at 800 °C. However, this can be reversed and the original perovskite can be recovered by heat treatment in air at 800 °C. While no evidence for coke formation is obtained in 90-70% CO2/10-30% CO (pO2 = 10-17-10-18 atm) mixtures at 800 °C, in 70 CO2/30 CO, minor impurities of SrCO3 and Fe nanoparticles were observed, with the latter potentially beneficial to the electrochemical activity of the perovskite. Consistent with prior work, symmetrical two-electrode full cells (LSFCr used at both electrodes), fed with the various CO2/CO gas mixtures at one electrode and air at the other, showed excellent electrochemical performance at 800 °C, both in the SOFC and in SOEC modes. Also, LSFCr exhibits excellent stability during CO2 electrolysis in medium-term potentiostatic tests in all gas mixtures, indicative of its excellent promise as an electrode material for use in symmetrical solid oxide cells.